27 Sep
2010
27 Sep
'10
8:19 p.m.
Then I can get back to it and try. If not, perhaps
someone can give me the
pinouts or diagram of how to lash up a cable that that connects to the
mainboard, lets drivesel go to the switch, and then hits the 5.25
edge-card connector and the 3.5 IDC connector.
Just a moment! :D
http://pinouts.ru/Storage/InternalDisk_pinout.shtml
Seems easy enough. And thanks Tony that remembered that the motor ON
signals have to be swapped too.
Just swap pins 10 and 14 to pins 16 and 12. You can use a DPDT switch
for that. If you want a drawing of how the switch must be wired, e-mail me
in PVT.
(just asking, because not everyone understands that switch things :))