10 Apr
2003
10 Apr
'03
12:15 a.m.
I *believe* that it could be used with a 380 but you'd need the interface card that
goes in the bottom slot of the 9888 along with the cable and the card that goes in the
computer. IIRC these are usually one big assembly. The card that goes into the computer is
a DIO card so you'd need the DIO-II to DIO slot converter. There are expansion chassis
for the 300 series but I don't know if they fit every 3xx model. Usually you replace
the 3xx cover with a cover with a slot in the top. Then the expansion chassis sits on top
of the 3xx and there is a short card that connects bewteen the two backplanes. Essentially
it converts the 3xx into a taller chassis with more slots.
Joe
At 06:57 AM 4/10/03 +0200, you wrote:
Hi, Joe
FYI, there are a couple of pictures of HP
98622 GPIO cards at
<http://cgi.ebay.com/ws/eBayISAPI.dll?iewItem&item=2521082261&category=25400
.
Mmmm... Could I use it with one 9000/380 ? I ever was curious about these
expansion units and its possible use with my system.
Thanks and Greetings
Best Regards
Sergio