15 Feb
2008
15 Feb
'08
5:13 p.m.
dwight elvey wrote:
Speaking of Eprom Programmers - I have a Pro-Log with the 1702A module.
What I do not have is the manual for the 1702 module...Does anyone have
a copy? I have a copy of the schematics thanks to another member here -
but the module has a switch to set Vdd at either -9 (1702A?) or -10V
(1702 only?). My module works fine, but just like to have complete docs.
Hi John
The 1702 used a different algorithm than the 1702A did and the pulse
widths were different. The switch is most likely to select between
1702As and 4702As. The 4702A used -10V to match the 4004. I doubt
the programmer was intended for 1702s.
Dwight
Ah, well it appears that the 1702 had a Vdd of -12V and the 1702A was
-9...still I suspect Pro-Log would have labeled the switch a bit clearer
if one position was for the 1702 and the other for the 4702. Maybe...
Still the docs on that module would be nice!
John :-#)#
--
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
www.flippers.com
"Old pinballers never die, they just flip out"
From: jrr at
flippers.com
---snip---