Cromemco FS

I have gotten lots of requests for details on the systems. So I am posting a list of Cromemco systems and boards that I have FS. I am open to all offers, of course I am looking for the best one. Please reply to whoagiii(a)aol.com not to the list. Portland, Oregon 97214 is home. Cromemco C 10 Computer with evternal 5 1/4" Floppy and Kbd I think this system was the controller for the Computer following System 2 in a dual height wood cabinet 30"X24"X36" with a 5 1/4 FHFD and the following cards : UUX 68020 CPU wi 68881 - 16 mhz 64FDC PRI STDC SFLSH 2 2048 MSU MCU SVID SDMB 1024 KTD SDCM SDMA The following software in 6 boxes of 5 1/4 disks containing Fortran IV, Ptr., Com, WP, Proprint, Procall, backup and Data and 68000 Fortran 77. Most of the disks are copies and not originals. The following Books a Binder of Program data, Cromix-plus users manual, Intro to C+, Baseline Graphics Inst., S Series Board Family Inst., SDD Camera Digitizer Board Manual, SDCM Color Monitor Board Manual, C-% Tech Reference, Cromix+ Programming, 68020 Cromix Admin. This system may not be complete. The boards appear to be out of order and the cables pulled off the cards. All of the cables may not be there. System 3 with 2 8" 1/2 Ht Floppys and a 5 1/4" hard drive (I would have to remove it to identify it) and the following cards 4X 256KZ Memory DPU 68000/8 Octart 16FDC WDI-II System 1, CS-1H, 6/13/83, 8 Slot MF with the following cards WDI-II 4X 256K Memory DPU Z80 & 68000/8 Octart 16FDC This Octart brake3out cable is homemade. It breaks out to 8 serial connectors mounted on a wood board. One of the cables has been damaged by it being ripped out of its plug. Extra Cards and Parts, please bid each. 3X 64KZ-I 2X 256KTP ZPU ZCPU SCC 64FDC TU-ART Quadart attached to a IOP Keyboard All are untested. After reading the threads about starting old systems I decided to sell them as-is untested. Thank you, Paxton