7 Nov
2003
7 Nov
'03
11:45 a.m.
Or, leave the keyboard attached and see what comes out of the console...
be sure to use a null cable.
As a datapoint, my sun 13w3 adapter does work on my Onyx.
David's suggestion is a good one; many Indys turned into headless web
servers.
-Ryan
David Holland wrote:
And has the console device NVRAM setting set to the
graphics adapter?
(If I remember correctly, you get black screen if its set to serial even
w/ graphics boards in one.)
You might try pulling the graphics adapters out, unplugging the
keyboard, and hooking up a serial console.
David
On Fri, 2003-11-07 at 19:46, Ryan K. Brooks wrote:
owen(a)bardstown.com wrote:
I just bought a rad Indy from EBay. It seems to
start up fine, as shown by the
rockin' startup music! However... I can't get video... I have a 13w3 --> VGA
adapter that was supposed to work with it. The light on the Indy goes green but
my NEC Multisync monitor stays red. I tried the adapter on my IBM POWERstation
and saw the NEC monitor turn amber. Any thoughts?
-o
Does your monitor support the scan rates in question?