13 Jun
2005
13 Jun
'05
noon
Subject: PDP 11/23+ progress
From: "Jim Beacon" <jim at g1jbg.co.uk>
Date: Mon, 13 Jun 2005 19:33:14 +0100
To: "Classic computer list" <cctalk at classiccmp.org>
I finally managed to get my OEM 11/23+ to boot from the RL02 today, the
solution to the OEM boot ROM problem was to set the RLV12 addressing mode to
18 bit, rather than 22bit. I assume that this is a feature of the OEM boot
program :-)
I'm now getting garbage on the terminal, but have yet to figure out which
setting I've got wrong!
Jim.
Please see our website the " Vintage Communication Pages" at WWW.G1JBG.CO.UK
Likely baud rate. Try 4800n1.
Allison