15 Apr
2003
15 Apr
'03
6:19 p.m.
On Mon, 14 Apr 2003, Fred deBros wrote:
I tried pulling the framebuffer card out ....no go!
Do kbd and mouse work with this cable? Should!
No, there's a bunch of DEC 'keyboard/mouse' cables that have a 15pin
connector, each with a different pinout. Don't ask me why.
And where oh where do I get the 3pin to 3bnc cable
from? Ebay? What's it
called?
The '3pin' connector is probably a 3W3. I'd try either eBay, finding
someone on the list with a spare, or your favorite surplus equipment
place.
I thought about getting some radioshack powersupply
plugs that fit into
the 3pin socket and make 3 coaxcables with them. Any other way to
juryrig the 3pin connector of the vlc4000 and this turbochannel card -d
and -f type?
You could just solder new connector(s) onto the framebuffer... if you
don't mind modifying it.
AND: Does netbsd 1.6/pmax or its X really work with
these framebuffers
and allow a GUI? In which case I'll dump Ultrix of course.
I'm fairly sure that it doesn't, but you could probably find out by
looking on their website - they probably have a supported hardware list
for the port.
Pat
--
Purdue University ITAP/RCS
Information Technology at Purdue
Research Computing and Storage
http://www-rcd.cc.purdue.edu