Someone else has given me the information now, so no need to do anything.
Thanks
Rob
From: Rob Jarratt <robert.jarratt at ntlworld.com>
Sent: 14 November 2019 20:59
To: 'Jason T' <silent700 at gmail.com>; 'General Discussion: On-Topic
and Off-Topic Posts' <cctalk at classiccmp.org>; rob at jarratt.me.uk
Subject: RE: Connecting LK250 to VAXmate
Hello Jason,
I have all the bits necessary to make a cable for the LK250 now, without butchering the
IBM Model M cable I bought (which turns out to only have 4 out of 6 wires). All I need now
is the pinout. I have the VAXmate technical description which gives me pin numbers and
signals for the cable, but I am not really sure how that maps to the connector pins. So,
if you, or anyone else, could tell me the pinout for the LK250 cable I would be very
grateful. From the technical description it looks like I may be able to get away with only
4 wires, not sure.
Thanks
Rob
From: Jason T <silent700 at
gmail.com <mailto:silent700 at gmail.com> >
Sent: 15 June 2019 14:46
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at
classiccmp.org
<mailto:cctalk at classiccmp.org> >; robert.jarratt at
ntlworld.com
<mailto:robert.jarratt at ntlworld.com> ; rob at jarratt.me.uk <mailto:rob at
jarratt.me.uk>
Subject: Re: Connecting LK250 to VAXmate
On Sat, Jun 15, 2019, 03:28 Rob Jarratt via cctalk <cctalk at
classiccmp.org
<mailto:cctalk at classiccmp.org> > wrote:
I recently acquired a VAXmate with an LK250 keyboard. The problem is the
keyboard came without the cable. It uses an 8-pin SDL connector and the
usual tiny MMJ-like connector at the keyboard end. I don't know the pinout
and I don't have the necessary crimping tools, is there any source for such
a cable?
Is it actually MMJ, with the offset pin, like a DEC serial cable? Or is it just an RJ
connector like a telephone handset? And is the SDL end the same type as on an IBM model M
keyboard?
I have a VAXmate buried in storage. With enough prodding I could dig it out and try to
determine the pinout of the cable.