4 May
2017
4 May
'17
8:04 a.m.
On 5/4/2017 7:36 AM, Guy Sotomayor Jr via cctalk wrote:
Does anyone know how to convert KVa to 208v 3-phase
currents and/or HP? IBM?s docs all specify power in KVa and most of the 3 phase
converters (other than what Bob posted) seem to specify HP. If I?m going to spend serious
coin on a phase converter (I think I found it online for ~$3k?ouch!), I want to make sure
it?s sized properly.
Thanks.
TTFN - Guy
You will also need to get the motor start information, or you will
vaporize a phase converter.
Another possible approach that a friend is taking is to take three
single phase identical UPS system and synch the phases of the three
converter output circuits to proper three phase.
He's made up one from three junk APC units I've got. I can forward info
if you would like on this approach from him. One thing that helps is he
snagged and maintained the drawings of all of the APC and other output
circuits over the years and has good info on how to pull this off.
The quadrature power will be something to deal with on your three phase
loads, but you may be able to run quite a bit of single phase hardware
directly off of the mains.
thanks
Jim