2 Jul
2004
2 Jul
'04
9:34 p.m.
Phil,
I've got the Farnell "L" series instruction book complete with cct. diag.
It doesn't mention L30B however only L30/1, L30/2 , L30/5.
I haven't got a scanner but send me your snail mail address and you can
borrow it to scan etc. for the cost of postage if no-one else has it .
Geoff.
----- Original Message -----
From: "Philip Pemberton" <philpem(a)dsl.pipex.com>
To: <cctalk(a)classiccmp.org>
Sent: Wednesday, June 30, 2004 2:35 PM
Subject: Re: I'm so stupid... Was: Head Cleaners
I think I've still got a power supply somewhere
that has a flaky 5V
regulator. Sometimes the regulator starts up fine, then runs for hours.
Other
times it just sits there dead - strangely enough,
drumming one's fingers
on
the casing usually gets the regulator to start.
I'll fix the dry joint on
the
PCB when my Farnell L30B bench PSU dies. Speaking of
which, does anyone
have
a service manual for the Farnell L30B power supply?
One of these days, I'll build a custom power supply. At the very least,
the
L30B needs its switches, one of the meters and all of
the potentiometers
replacing. Oh, and I need to find two self-tapping (?) screws to hold the
side panels on. Bleagh.
Later.
--
Phil. | Acorn Risc PC600 Mk3, SA202, 64MB,
6GB,
philpem(a)dsl.pipex.com | ViewFinder,
10BaseT Ethernet,
2-slice,
http://www.philpem.dsl.pipex.com/ | 48xCD, ARCINv6c
IDE, SCSI
... Growing old is mandatory; growing up is optional!!