Anyone recognize this PCB?

I take it that despite the 35+ replies, no one actually recognized this board, or wants to make an educated guess? BTW, in view of the apparent confusion and at least one incorrect opinion, the non-hybrid D-sub S and P refer to female (socket) and male (pin or plug, depending on manufacturer) _connectors_, not the shell. Same thing for many similar connectors, such as XLR & DIN, where the shell is normally the opposite gender of the connectors. So, the DB25S below is the same as found on the back panel of most of our old RS-232 terminals & systems (or a pre-USB PC printer port). -----------------Original Message----------------------------------------------------------------- I'm hoping someone can ID this interesting board (sorry, no pix avail). 16Bit ISA (full-length) DB25S Connector 20pin header socket 10 pos DIP SW 10 seg green LED bar graph 3 sets of jumper pins 80186 CPU 2 x XC2064 XILINX FPGAs Pair of IDC 7130/7140 (1Kx16 dual-port memory) 2 x 256x8 SIPPs C8208 DRAM controller 2 x 27256 EPROMs 2 x DS1225Y BBU SRAM 2 x LH0033 Fast FET buffers (12 pin metal cans) Misc 74LS & F glue chips Nothing recognizable in the EPROMS or SRAMS; 1 EPROM is blank (erased/defective?) Ring any bells with anyone, or time to scrap for parts? mike