27 Feb
2008
27 Feb
'08
8:31 p.m.
On Wed, 27 Feb 2008, Vincent Slyngstad wrote:
Date: Wed, 27 Feb 2008 19:56:14 -0800
From: Vincent Slyngstad <v.slyngstad at verizon.net>
Reply-To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at
classiccmp.org>
Subject: Re: 8/S Replica
Say $.25 to $.50 per sqr inch 4 layer. Contact fingers extra but not a whole
lot, Pre-panelized (say 100 1x2" breakaway pcbs on a 14X18 panel) maybe 10,000
sq inches purchase qty (50 panels).
Peter Wallace
On Wed, 27 Feb 2008, Peter C. Wallace wrote:
> Probably cheaper/board than the female part of CF socket...
> Even with gold, 2 or 4 layer PCBs this size should be less than $2.00 each
Hmm. I get $5 per board, and that's assuming you can get quantity 100 of
each of the module types! For a single replica, you'd pay more per board.
I didn't get prices around $2 until quantities closer to 250 per design.
Unless you know some place a lot cheaper than I do.