19 Dec
2015
19 Dec
'15
11:18 a.m.
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Dave
Wade
Sent: 19 December 2015 18:32
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: RE: VAX 4000-500 PSU Overload?
Seeing as it already seems to have over current sensing, I guess it has
some
small resistors in there so perhaps it is possible to
measure the current.
I
notices one looks like this:-
http://uk.farnell.com/welwyn/oar1-r020fi/resistor-1-0r020/dp/1200359
Ah! So that is what those things are! I definitely think this one is
detecting something wrong and shutting down the 12V side. I have just been
doing some tests with a dummy load and the 12V side will come up and then go
down a few moments later, sometimes it will stay up, it seems a bit random.
Presumably then, there is something wrong with the overcurrent detection.
I will have to look into how you test these, or perhaps just replace them
and see what happens.
Regards
Rob