Z80 disassembler for Linux

On Wed, 07 Apr 2004 16:08:17 -0400 Jim Donoghue <jim(a)smithy.com> wrote: Anything as simple as a Z80 disassembler is a stdin/stdout app anyway. You should find a DOS emulator for Linux and use that to run a DOS disassembler. You can even run a free/alternative DOS if you don't want any Microsoft products on your drive. There's no reason to invent the wheel, and I suspect most people would just run something old under emulation, which is a fine tradition going way back. A universal disassembler that is 'Open Source' would be a cool thing to have, though. I at one point was even running my Needham EPROM programmer (the cheap simple one that is an ISA card and driven by a DOS program) under emulation on Linux. Just had to 'punch a few holes' with the Dosemu configuration for IO ports that DOS then had permission to read/write directly through. That said, you should look at tools that the people emulating and/or writing games and code for the Gameboy are using, and I think one of the HP Calculators, as I understand those devices have a Z80-like processor in them. That's likely to be the place where 'the newer generation' are messing around with Z80 code, so it's where you'll find Linux stuff, if anywhere.