Getting Data I/O Promlink to talk to a System 19 programmer

Here is a photo of a Data I/O 29B, the replacement for the Model 19. Press the blue "Select" key followed by the "F" and "1" key. Press "Start" and the programmer enables the serial port. All of the operations of the programmer can be controlled by a computer or terminal. (The Model 29 may require two presses of the Start Key.) http://commons.wikimedia.org/wiki/File:Data_IO_29B_UniPak_2.jpg The Computer Remote Control App Note can be found here: http://bitsavers.trailing-edge.com/pdf/dataIO/ Michael Holley -----Original Message----- From: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Richard Lynch Sent: Friday, September 28, 2012 6:43 PM To: General Discussion: On-Topic and Off-Topic Posts Subject: Re: Getting Data I/O Promlink to talk to a System 19 programmer On 9/28/12 12:57 PM, "Alexandre Souza - Listas" <pu1bzz.listas at gmail.com> wrote: Huh?