25 Jun
2005
25 Jun
'05
7:25 a.m.
I have a DataI/O model 19 and I think I have a 2708 plug-in for it. The
reason that most programmers don't support the 2708 is because it requires
three voltages to operate. Come to think of it, I have a couple of old
Prolog programmers and I think that I may have 2708 plug-ins for one of
them too. FWIW I bought the Prolog units because they were all I could find
that would program the 1702s.
Joe
At 11:12 PM 6/24/05 -0400, you wrote:
All:
OK, I'm ready to burn a modified copy of the Altair Turnkey Monitor
into a 2708 to use in my 8800b as a test program. Lo and behold, my
programmer won't do a 2708 -- it'll only go down to 2716. Naturally I don't
have any 2716s around and the VG ROM board accepts only the 2704 or 2708
(without modification).
So I browsed around eBay and elsewhere to see if any other
programmers support the 2708 and it seems that none do. They all start at
the 2716.
What programmer can I look for that has the ability to program a
2708?
Thanks.
Rich
Rich Cini
Collector of classic computers
Build Master for the Altair32 Emulation Project
Web site: http://highgate.comm.sfu.ca/~rcini/classiccmp/
/************************************************************/