25 Mar
2009
25 Mar
'09
2:31 p.m.
On Wed, Mar 25, 2009 at 5:24 PM, Gordon JC Pearce <gordonjcp at gjcp.net> wrote:
John Floren wrote:
If it's not clear from the picture, the end of the wire is stripped
and bent a bit, then covered with a big blob of solder. Should I try,
say, using electrical tape to stick it back on the side and give
things a shot? If you look closely at
http://csplan9.rit.edu/users/john/hazeltine/hazeltine-0005.jpeg it
kinda looks like the wire was just stuck on there with the solder
blob.
John
--
"I've tried programming Ruby on Rails, following TechCrunch in my RSS
reader, and drinking absinthe. It doesn't work. I'm going back to C,
Hunter S. Thompson, and cheap whiskey." -- Ted Dziuba
The thing is, I'm not really sure where that
wire is supposed to go...
does it just need to stick on to the side in some way, which is why
the solder probably broke in the first place?
It looks like it might be part of the clamp that holds the cores together,
but it's kind of hard to tell...
Gordon
