PDP emulation

<> >V7 runs nice on E-11. Runs nice on my 11/73 too. <> > <> >Allison. <> <> REALLY?!?! What are the hardware requirements for V7? I thought they <>were a lot more restrictive than that. I'm assuming that it does not <>support MSCP disks. No MSCP, RL02. ;) I'd need to run 2.11 to get MSCP. <No, it doesn't, but it does run on any Q-bus machine with an MMU and <suitable disks. I've had it running on an 11/23 for the best part of ten I forget if V7 needed I&D space or 2.11 meaning the 11/23 was not enough. The 11/73 has the added I&D bits where 11/23 only has user registers and MMU. <years, and it was installed on the same machine almost as long before I go <it. Present setup is 11/23, 256KW, 2 x DLV11J, RLV11 + 2 x RL02, RXV11 <workalike, IBV11, BDV11. <Allison, can you remind me what you did to make it work on an 11/73? You and Tim Both helped get it going as I could not make at that time the pack needed. I don't run it often as Unix is less than really interesting to me but being an RL02 pack I can run it on a whim. Got it onto a RL02 pack. It's the supnick emulator V7 binary image for RL02 and it will run from RL02 IF the pack is a RL02k-DC (no defects). The reason for that is the image is for a theoretical perfect disk and it's bad block map is zero defects. The hardware is 11/73(KA11J-A), 2MB ram, DLV11-F, DLV11J, RLV21/RL02, RXV12/RX02, RQDX3/RD52(x2)/RX33, TQK50. It's a very stuffed BA11N box with a CD/CD (18 slots) backplane. Allison