13 Jan
2007
13 Jan
'07
11:03 p.m.
-------------- Original message from "Jay West" <jwest at classiccmp.org>:
--------------
Beggers can't be picky . I can handle most anything
Disk would be in a floor cabinet
your right. The list I have does not really say. I have 4) 7970b's
is this 2 card set for these ?? of coarse no cables
Jerry wrote...
I pickup a few connectors today and will make up one shortly
All of this HP 1000 talk got me going on mine.
Good. Mission Accomplished :)
Does anyone have a stash of these.
Yes.
I have no cables and
cant seem to find anyone that does. It seems that most
of these are offered with out the cables. I would guess they
all go to bulhead connectors and are just easier to slip off the
connector on the cards.
(on HP) No, I've never run into any cabinet bulkhead
connectors except for
DB25 panels (well, ok, some of the 13037 stuff). Everything else was direct
cable from device to interface. On a properly buttoned up HP it wouldn't be
easier to slip them off the cards, what with ground cables sometimes screwed
in and the PCA retainer bracket locked in and the rear panel over the I/O
cards for proper ventilation and the battery backup over that ;. That's not
to say everyone observed those recomendations of course.
- Console 12966a
I don't have a
spare, I make more anytime I need one from spare connector
hoods. The jumpers in the hood for wiring to a BACI are a pain. - HPIB disk 12821a
I may have a spare,
what length do you need. - HPIB Mag tape 13183
Hummm I don't
have manuals in hand, but I don't believe 13183 is a HPIB card
is it? Isn't that the "normal" HP proprietary interface?
> Also Trying to figure out 2 cards
>
> HP 12250 60001 and a FDS n612 4256-001
The HP 12250-60001 is very close to a 12792 muxer card
in chip type and layout. Both use 0.10" pin spacing on the
external connector.
The Other is a Typo It is a FPS n612 4256 001 (non Hp card)
Date code is old. (1977)
Have Pics. but no easy place to post. can E-mail
Doesn't ring a bell at all. Got pics?
Jay
This thing has 2 different disk interfaces. 13175D and 12821A
I have both HPIB and 7906 dives
I have both 7970b and 7980E Mag Tape drives
Thanks, jerry