8 Feb
2013
8 Feb
'13
7:52 a.m.
On Fri, Feb 8, 2013 at 7:59 AM, Henk Gooijen <henk.gooijen at hotmail.com>wrote:
3)
According the Fieldguide, the KE11-B can be installed instead of the
KE11-A.
That is the EIS board for the 11/35, -40. Note that the 11/35 has several
jumpers that need to be set if you install EIS, FIS, or MMU. Even for the
KW11
there is a jumper, IIRC. For the MMU you even must cut a wire on the
backplane!
But this is all clearly describes in the 11/40 CPU manual.
Does the KE11-B fit into the processor slot used by the KE11-A? My
PDP-11/40 has some indication that it had an EAE (sticker above the
backplane has EAE in faded ink), but it has an EIS board.
Are there any spare FIS options floating around?
-chuck