25 Oct
2002
25 Oct
'02
9:22 p.m.
On Fri, 25 Oct 2002, Glen Goodwin wrote:
Can anyone help me with settings on this drive?
Specifically, drive select, termination, and pinouts on the power connector
(J2) would help.
Same as the other 5.25" drives. That's why they are called "SA400
interface". Such as drive selects on pins 10, 12, 14, . . .
But some newer drives have added SIDE SELECT (for double sided drives),
and "density" for multi-media drives, such as 1.2M.
Termination is required on the last drive on the cable. Lack of proper
termination can make for flaky operation, but will not generally
prevent it from working.
Power connection isthe same as all other (well, ALMOST all) 5.25" drives.
The SA400 is a 48TPI, 35 track drive. Most drives that replaced it added
another 5 tracks.
Also, the specimen I have has a power switch on the
front which appears to
be factory-installed. Is this common for this drive? The photos I found
on the 'net don't have a switch . . .
I've never seen a factory switch on the front of one. Are you sure that
that wasn't a user added switch, such as one to override the write-protect
for flippies?
--
Fred Cisin cisin(a)xenosoft.com
XenoSoft http://www.xenosoft.com