Zane H. Healy wrote:
I don't know the answer to your question, however,
I do know this.
If you haven't already imaged those floppies, you need to.
Zane
There are some of them archived from another person already..
From that concrete Floppy I have 3 copies, so I think
I'm not in a hurry.
Currently I can't low level format the floppies with that RX01 (or RX02?)
like russian floppy drive, I simply don't have a format program.
I do have a CP/M Machine and get a Drive next week to test if I can format
the new floppies that I have on that machine so I can copy the at least the
disks that I've playing with.
I think I know what I'm doing here. That machine is rater old and I
repaired the 3rd set of boards now to wake at least another one.
They are for a bunker museum from the former GDR.
If you want to see some pics from the inside of this machine, look at here:
http://www.robotrontechnik.de/html/forum/thwb/showtopic.php?threadid=7733
This is a QBUS machine but with metric connectors and metric dimensions.
It's in german altough..
Here are some Pics from the machines (the tower and a desktop, 11/03 like
on the blue steel box) that are now in the bunker. I only have a Floppy
drive and an card craddle here to repair this things.
http://www.tiffe.de/Robotron/E60/DSCF0065.JPG
http://www.tiffe.de/Robotron/E60/DSCF0066.JPG
http://www.tiffe.de/Robotron/E60/DSCF0067.JPG
http://www.tiffe.de/Robotron/E60/DSCF0068.JPG
The last is a GDR Robotron made Printer SD1156 which is a 35 needle printer
(makes a 5x7 matrix print for an complete letter at once). It can only
print latin capitals and cyrillic capitals where the small latin characters
are in the ascii table. (when it wasn't modified like that which I had
tens of years before on my CP/M computer...)
Regards,
Holm
--
Technik Service u. Handel Tiffe,
www.tsht.de, Holm Tiffe,
Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741