13 Feb
2003
13 Feb
'03
3:55 a.m.
This could be a problem with your Connor HD, the ones
in the Grid 15xx are notoriously unreliable. Go to
http://groups.yahoo.com/group/RuGRiD-Laptop/
In the files section are set-up and boot disk files which
would allow you to boot from floppy and at least see if
the HD is recognized. If not you need to replace your HD
with one of the 3 the 1530 recognizes. There is also a file
to alter the BIOS to allow a larger Connor HD than the
biggest 80meg one to be installed.
I regularly give my 2 Grid 1520s a sharp rap or twist to
unstick the HD. :^) I haven't anything of value on it that I
can't replace with a backup and haven't yet found a cheap
Connor with the Grid specs. YMMV
Lawrence
On 11 Feb 2003, , Ricky wrote:
Dear Sir,
Greetings form Geolab! We are formed in 1991 as an
independent multi-discplinary Geotechnical, Environmental
and Construction Materials Service firm providing
engineering and scientific consulting, subsurface
exploration and testing services to both public and private
sector clients.
At this moment, we are using Gridcase 1530 (386) for the
purpose of doing our Pile Drive Analysis Test (PDA Test).
Due to this computer is an old unit, we frequently facing
problem that bother us once we turn on the computer. The
monitor always promp the error as stated below:
"Invalid configuration Information : Code 02
Strike F1 key to continue"
However, once we strike the F1 key, another error will occur
named, Disk Boot Errores.
We really appreciate if you can help us out in this matter
as soon as possible, this computer is really valuable for
our department. We hope to hear from you soon.
Thank you for your kind attention.
Regards,
Ricky
Engineer
ligkig(a)hotmail.com
lgwalker@ mts.net