Who are they? Just in case others may have need for the same items.
----- Original Message -----
From: "Bill Richman" <bill_r(a)inetnebr.com>
To: <classiccmp(a)classiccmp.org>
Sent: Wednesday, February 20, 2002 11:27 AM
Subject: Re: Mark-8 Reproduction Toggle Switches Needed
Well, I found the actual switches; they had 24 of the
ones I need 11
of, and 6 of the ones I need 6 of, so I took 'em all. Expensive
little buggers. (Is it bad if I spent more on parts to build a Mark-8
than it would cost to go out and buy a deluxe WinTel box running at a
zillion gigahertz...? <sigh>)
On Mon, 18 Feb 2002 20:34:39 -0600, you wrote:
>I'm getting together parts to build a Mark-8 (using a set of the PC
>boards and docs that Steve G has been selling on eBay). I've got
>everything but the case either on order or on hand, but I've
searched
>high and low for about 8 C&K #7108J4ZQE2 black
lever-handle toggle
>switches with no success. I found the SPDT switches, but I still
need
the momentary
ones. Any suggestions? Tried Mouser, DigiKey, Jameco,
JDR, Newark, and Allied (which is where I found the first type) as
well as several other smaller parts houses with no luck.
C&K/ITT/Cannon has offered to make me up a couple as samples, but I
need at least 6 and would be more comfortable if I had a couple of
spares.
-Bill Richman (bill_r(a)inetnebr.com)
Web Page:
http://incolor.inetnebr.com/bill_r
Home of the COSMAC Elf Microcomputer Simulator, Fun with
Molten Metal, Orphaned Robots, and Technological Oddities.
Bill Richman
bill_r(a)inetnebr.com
http://incolor.inetnebr.com/bill_r
Home of Fun with Molten Metal, technological
oddities, and the original COSMAC Elf
computer simulator!