8 Sep
2007
8 Sep
'07
3:18 a.m.
On Sep 7, 2007, at 9:44 PM, Ethan Dicks wrote:
A typical installation did have more than the CPU cabinet (the one I
ran for a decade had the CPU plus an H960 plus a TU-80 cab),
The 11/750 one I adminned from 1991-1993 consisted of the CPU
cabinet, a TU80 cabinet with an RA60 in the bottom, and two CDC 9762
drives (CDC-labeled, not RM02s) connected via an Emulex controller.
My 11/750 measures 29" W x 31" D x
41.5" H.
That's just the CPU--if there is a complete installation with extra
cabinets for disk/tape drives (not atypical), it could get to be a
bit bigger :). but in
this era, you can throw enough cards to be useful (disk, ethernet,
serial, printer...) in the internal DD-11DK _plus_ a smallish disk
right in the CPU cab.
That sure would be nice! :-)
-Dave
--
Dave McGuire
Port Charlotte, FL
Farewell Ophelia, 9/22/1991 - 7/25/2007