KY11 - ever debug one?

Van: cctalk-bounces at classiccmp.org namens Brad Parker Verzonden: zo 22-04-2007 02:43 Aan: General Discussion: On-Topic and Off-Topic Posts Onderwerp: KY11 - ever debug one? I forgot one thing. As you said that you had the connector the wrong way around plugged in, I would check the drivers (7417 on drawing KY-7) ... is the input signal also present on the output? You might have destroyed one of those ... The console has 2 fastons (tabs?) for the +5 V power, but +5V is also on that flatcable, pin 19. Plugging it in the wrong way gives +5 on pin 2. I do not see much harm there, as pin 2 goes to TB1 "BOOT SW". But check what connections you make between the M7859 and the console if that connector was plugged in the wrong way ... it might give clues! - Henk. This message and attachment(s) are intended solely for use by the addressee and may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law. If you are not the intended recipient or agent thereof responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by telephone and with a 'reply' message. Thank you for your co-operation.