19 Dec
2017
19 Dec
'17
2:36 p.m.
On Tue, Dec 19, 2017 at 2:25 PM, Josh Dersch <derschjo at gmail.com> wrote:
On Tue, Dec 19, 2017 at 2:15 PM, Al Kossow via cctalk
<
cctalk at classiccmp.org> wrote:
See the pictures at the below link:
https://1drv.ms/f/s!Aqb36sqnCIfMotpQIuc2-tDUva3iBw
It looks to be fairly straightforward; the plastic "ball on post" brackets
are mounted to the rack rails, and there are metal brackets that screw into
the BOP brackets that hold the PCB/lamp assembly.
Hope this is the right assembly for you, if not, or if you have questions,
let me know and I can try to fill in the holes...
- Josh
On 12/19/17 10:49 AM, Noel Chiappa via cctalk wrote:
I will see if I can grab some pictures this afternoon. We have a few
cabinets that I can take a close look at the innards of.
- Josh
Could someone who has one please take a look and
let us know (or, even
better,
send us photos)?
If someone can't get to mounted ones, I can trundle over to CHM artifact
storage
and look at one of our racks.
I would think LCM should have some readily accessable, though.