15 Jan
2008
15 Jan
'08
7:50 p.m.
Date: Mon, 14 Jan 2008 18:31:42 -0800
From: ggs at shiresoft.com
To: General at shiresoft.com
CC:
Subject: Re: 11/70 board set on e-bay. . .
The 11/70 CPU is *not* a unibus backplane. It is a *very* large
backplane that fills an entire BA11F.
--
TTFN - Guy
Yes, that's very true what Guy says, but it is even worse than that.
The backplane does fill the entire space from front to rear in a BA11-F,
but it is actually *two* equally large backplanes. The two halves are
just connected by the wire wrapped wires!
The first part is the CPU, the second part are the 4 Massbus controllers
and a few UNIBUS slots, IIRC. You can look it up in the handbook.
So, if the entire backplane is taken out of its BA11-F, you have to
handle that beast very careful! If that was to be shipped, I would put
it on a piece of wood with screws to transport it safely.
- Henk.