23 Feb
2004
23 Feb
'04
7:57 a.m.
Hi Joe
That sounds right. The full size QIC-36 is right.
Most of the jumps are located just above the connector. IRQ 2-7, DRQ 1-3 and
DACK 1-3.
There is also a 4-pin header (2 x 2) near the crystal (at the back / bottom)
called E1 E2 E5 E6.
I can copy the discs on some other discs, and then send them to Curt. We can
also do it the other way around.
I would appreciate your help. thanks
Nico
You can find my addres on www.farumdata.dk
----- Original Message -----
From: <TRASH3(a)splab.cas.neu.edu>
To: <cctalk(a)classiccmp.org>
Sent: Monday, February 23, 2004 6:23 PM
Subject: RE: Everex EV-831
I have three 5.25 inch floppies that have the labels
(copies):
EVEREX EXCEL STREAMING TAPE ST 4061 VER 4.06 EV0-00830-00 MAY 24 1988.
Disk 2 and 3 have similar labels, but are 4062 and 4063. Upon running
the tape program on disk 1, the options for hardware are:
Full Size QIC-36 tape controller board
Full Size cassette tape controller board
Half Size QIC-02 tape controller board
Diskette and QIC-02 board
2/3 Size QIC-36
Disk and QIC-36
Disk and QIC-02
The program does not give model numbers, but shows a graphic of the board
and all the jumpers.
Ya think this software will help you?
Joe Heck