2 Jul
2009
2 Jul
'09
10:23 a.m.
----- Original Message -----
From: <david_comley at yahoo.com>
Am I right in thinking that the console terminal connection is made through
pins on the backplane as there is apparently no socket on the board for this
purpose ?
George Wiegand wrote:
The console terminal connection maybe labeled directly on the backplane (a
row of ~10 pins), only 3 pins for the RS232 are needed. I guess you don't
have the info. to the pin outs?
Dave, what part of the world are you located in?
Dave, on your web page you mention "Each board has an AY-3-1015D UART on board
suggesting that the console serial port is built into the CPU". If you feel
like tracing the interface connections from the UART (probably thru some 1488/9
drivers), the datasheet for the 3-1015 is here:
http://www.datasheets.org.uk/pdf/761571.pdf
It's a pin-config'd UART, so the config may also be discernible from examination.