10 Jun
2016
10 Jun
'16
4:18 a.m.
Thanks Marc Sounds Great. Dave
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of
CuriousMarc
Sent: 10 June 2016 08:09
To: 'General Discussion: On-Topic Posts' <cctech at classiccmp.org>
Subject: RE: IO Selectric
Dave,
The best manual I have has 54 pages of visual diagrams for adjusting the
Selectric II, which should be mechanically similar to yours, save the
added
actuators. With about 7 adjustments depicted per page.
Really. That's no
trivial
piece of mechanical machinery, it's up there with
some of the most complex
mechanical calculators I have. But they are very well documented (unlike
said
mechanical calculators). I'm in the process of
uploading a folder with all
the
Selectric II manuals I have accumulated to my public
Dropbox, including
that
most useful "visual" guide. Once it's up
through my minuscule upload
bandwidth I'll post a link.
Marc
-----Original Message-----
From: cctech [mailto:cctech-bounces at classiccmp.org] On Behalf Of Dave
Wade
Sent: Thursday, June 09, 2016 1:07 AM
To: 'General Discussion: On-Topic Posts'
Subject: RE: IO Selectric
Thanks Chuck,
I should have got those before as I have been a member on there for ages,
just
couldn't remember they were there. The stuff in
mine looks very similar to
the
Louis Sanders article I have, so I am sure its from
the same article.
I now need to read the theory and clean, adjust and lubricate.
Dave
-----Original Message-----
From: cctech [mailto:cctech-bounces at classiccmp.org] On Behalf Of Chuck
Guzis
Sent: 08 June 2016 22:51
To: cctech at classiccmp.org
Subject: Re: IO Selectric
I just did a quick check--the Yahoo golfballtypewritershop group does
have
the
Louis Sander 1983 article from Micro magazine
about converting an I/O
selectric for general computer use.
There's also a two parter on the I/O Selectric theory of operation.
You should have enough there to keep you busy.
--Chuck