Panaplex display history

On 2015-May-29, at 3:54 PM, Jules Richardson wrote: Panaplex and other 7-seg gas discharge displays were used in calculators up to the mid-70s. Actually one of the last uses in a calculator might be the HP-9815 (1975/6): http://www.cs.ubc.ca/~hilpert/eec/calcs/HP9815A.html They were mostly used in desktops for the sake of the larger digit size but there were some pocket/handheld calcs that used the smaller versoions. In calcs, they were largely superseded by vacuum-flourescent displays which were easier to drive, had a longer life, and could also be made with bright, large digits. Heathkit used them in some items into perhaps the late 70s. They were also extensively in arcade/pinball games, as I'm sure many will recall. I'm not sure how late they were being incorporated into new designs in that arena. In their heyday (early/mid-70s) I'd say they could produce a larger, more uniform, better contrast, display than the then-early LEDs. Would have to look at specs and some calculations but they were probably more energy efficient than LEDs. Yes, to be accurate, Panaplex was a Burroughs trademark. There was the Panaplex I series which had a metal grid anode in front of the segments for the anode, and the more-prevalent Panaplex II which has a conductive coating on the glass for the anode. The Burroughs and Beckman displays are different in design. Generically, I refer to them as 7-segment gas-discharge displays. There were some lesser-produced designs from Japanese manufacturers. Generally, their failing seems to be the cathode poisoning common to all neon bulbs, and 'burning' of the thin conductive anode coating where applicable. Funny, I was about to mention that use. I remember them in use on gas pumps up to somewhere around the late-80s or early-90s. One of my bike routes takes me on a dike behind an industrial area. Sometime around the mid-90s I remember there being a yard filled with scrapped pumps, a lot of them missing the display/keyboard cover, so all the displays mounted on the big controller boards could be seen. I wanted to rescue some of them but never got around to pursuing it. I was kind of dissuaded by the thought they had mostly seen a long and continuous service life and may now(then) be of questionable reliability.