Panda Panel

(BCC to Spare Time Gizmos and Rich A. - both of whom may have a clue!) Folks, I've finally dug out my Panda Panel and got it going - after having to deal with various strangeness in a dodgy parallel port connector, and figuring out I really DID have to be root to get it to initialize! It all works; the 'aux' CPU load segments respond appropriately, as does the Run/Disk/Tape/Network cluster. But from the moment KLH10 is started, every single segment of the main display is ON and remains ON until the host machine is powered off. Any suggestions? Is this normal behaviour? Is it just that the thing is running too fast for me to see any patterns? Does the Panda Panel care what mode the parallel port is set to in the BIOS? The fact that the other parts of the panel do the right things suggests to me that the interface etc. is basically sane... but the one photo I've ever seen of an operational panel looks quite different... http://www.sparetimegizmos.com/Hardware/images/Lingling.jpg Thanks Mike http://www.corestore.org 'No greater love hath a man than he lay down his life for his brother. Not for millions, not for glory, not for fame. For one person, in the dark, where no one will ever know or see.'