27 Jul
2006
27 Jul
'06
9:14 a.m.
Allison wrote:
Dave Dunfield wrote:
For engineers and techs in electronics K=1000 as in 10k resistor
(nominally 10,000 ohms) and Meg=1,000,000 we also have the 10-n value
of milli, micro,
nano and pico to name a few and they are all powers of 10. In
programming/computer context only do K=1024 and M=1048576. This leads to
much confusion as a result for those that a marginally technical. As a
result
in documentation I tend to insist that some context help such as
K_bytes_ or
Meg_ohms_ be there to keep some sense of If it's powers of 10 or 2.
Whats a millibyte? Saw that once!
Allison
Most of the confugion is by idiot's that don't know what the fuck S.I.
means.
--
The real problem with C++ for kernel modules is: the language just sucks.
-- Linus Torvalds
Although
according to the author the 6502 can address 65K, not 64K.
This is very common, and is based on an assumption of 'k' meaning
1000 (decimal), not 1024 - 16 bit bus - 65535 bytes (65 thousand).
I've seen it in data sheets and other reasonably technically accurate
material - I guess it depends on your point of view (and how low-level
your experience is :-)
Hard drive manufacturers have been doing the same thing with "meg"
for years - specing in decimal 1,000,000 makes the drive sound bigger
than specing in 2**20 sized blocks.
Cheers,
Dave