3 Jul
2000
3 Jul
'00
7:41 a.m.
I'm using 4.1, and when I use BRU from brusys, I get the message
that the target may not be a bootable system.
Ed
CLASSICCMP(a)trailing-edge.com wrote:
--
The Wanderer | Geloof nooit een politicus!
wanderer(a)bos.nl | Europarlementariers: zakken-
http://www.bos.nl/homes/wanderer | vullers en dumpplaats voor
Unix Lives! windows95/98 is rommel! | mislukte politici.
'96 GSXR 1100R / '97 TL1000S |
See http://www.bos.nl/homes/wanderer/gates.html for a funny pic. of
Gates!
I have a bit of a weird problem, I'm trying to
make a 2nd bootable
system disk containig RSX-11M+.
I have an 11/83 with 2 RD53's and 1 RD54, and the system is on one
of the RD53's. I booted [6,54]brusys.sys and then used DSC to copy
the contents to the 2nd RD53. DSC did not report any error.
Then when trying to boot du2 (the 2nd RD53), nothing happens besides
a number of retries to access the boot information.
DSC is supposed to copy the boot information as well as the data,
so I'm wondering what I do wrong.
Which version of 11M+ are you using? DSC became "unsupported" in recent.
versions, the "supported" way of doing what you want is BRU. DSC isn't
even included in the last few binary releases.
(Thank the heavens that you aren't having to deal with PRESERV or
ROLLIN!)
--
Tim Shoppa Email: shoppa(a)trailing-edge.com
Trailing Edge Technology WWW: http://www.trailing-edge.com/
7328 Bradley Blvd Voice: 301-767-5917
Bethesda, MD, USA 20817 Fax: 301-767-5927