21 Dec
2000
21 Dec
'00
11:31 a.m.
Re:
Subject: New musuem Item
Today I picked up a HP 3000 980/100 at auction for
$45. Still have not
I almost missed this, since you didn't mention the "3000 980/100"
in the subject line!
unloaded it yet need a way to get it off the van, they
loaded it with a
forklift. I just have the cpu no monitor or keyboard. Anyone have
spec's on this unit.
It's big.
HP's first two MPE/iX PA-RISC systems were the HP 3000/950 and HP 3000/930
(HP-UX equivalents: HP 9000/850, HP 9000/840, IIRC).
I can't recall the HP-UX model number equivalent of the 980...marketing
started playing games making identical hardware have model that didn't
match in their bottom 2 digits :(
PA-RISC 1.0 (aka PA7000)
CPU: 32 MHz? (The 960 was about 27.5 MHZ, and the 980 was the successor model)
Max memory: 512 MB
IO: CIO ... this means it won't run MPE/iX 6.5 or later. MPE/iX 6.0 is the last
release it will run.
I/O devices:
HPIB
SCSI (possibly...not all 980s had SCSI)
If you have a SCSI controller, you *might* be able to boot from a SCSI disk...
IIRC, that capability required a firmware upgrade. So, some systems had a SCSI
controller, but booted from an HPIB boot disk.
Did I mention that it's *big*? :)
Stan Sieler sieler(a)allegro.com
www.allegro.com/sieler/wanted/index.html www.allegro.com/sieler