Help setting up a SBS/Bit3 PCI-to-VMEBus cards

Hi Ram, I've had experience using the Bit3 Model 973 adapter set at the company I once worked at. It was back in 1997 when the project was constructed and my memory has suffered quite a lot of bit-rot since then (sound familiar to some of you? :-) You do need windoze drivers for the PCI side, but I don't have an installable set in the project software files I kept that used the product. I do have some files I could email to you to pick apart if you cannot find an original windoze95 driver disk. The application was written in Delphi 2.x while the custom-designed VMEbus controller used homespun firmware -which I do not have. I should note that the homespun files are commented in mostly English but there's some German interspersed -depending upon which engineer wrote them. I recall it was a pita to get the windoze95 machine and the VMEbus system communicating well. My German colleagues (at our parent company) designed/built the VMEbus hardware did the software integration. They reported that they used the right magic incantations and German cuss words. I just did the English translations of the user interface for us and the Chicago plant. Wish I had kept a copy of the drivers package and manual in case I or someone else ran into a 973 :-/ Oh well . . . Let me know, Ram, if you want the installed driver files (LESS the .dll and other files that were not placed in the user directory). Regards, Chris F. NNNN Upon the date 20:30 02-07-05, Ram Meenakshisundaram said something like: Christian Fandt, Electronic/Electrical Historian Jamestown, NY USA cfandt at netsync.net Member of Antique Wireless Association URL: http://www.antiquewireless.org/