Thanks Dwight.
I will do some more Googling tomorrow, and wade through the results :-(
I tried the link a few times, but I get a 404. Will try it again tomorrow too.
- Henk.
________________________________
Van: cctalk-bounces at
classiccmp.org namens Dwight Elvey
Verzonden: di 14-02-2006 21:19
Aan: cctalk at
classiccmp.org
Onderwerp: Re: seeking connection information of CRT assy of Olivetti M21
Hi Henk
I just did some google and found a web page that
looks like it may have technical docs for the M21.
Look at:
http://www.elhvb.com/mboards/olivetti/system1.html
<http://www.elhvb.com/mboards/olivetti/system1.html>
Selecting cap1.pdf brings up a email request. I'm not
sure if it will lead to anything but you might get a
schematic showing the connector pins.
Dwight
From: "Gooijen, Henk" <henk.gooijen at
oce.com>
Hi all,
I got an amber 10" monitor that was originally in an Olivetti M21.
I like the screen size and the color, so I would like to build some
sort of terminal with it. From the PCB comes a flat cable which
ends in a DB25 connector. As this is all connections I see,
I assume that it gets a low voltage power supplied via this cable.
Does anybody have more info on this connector?
thanks,
- Henk, PA8PDP.
This message and attachment(s) are intended solely for the use of the addressee and may
contain information that is privileged, confidential or otherwise exempt from disclosure
under applicable law.
If you are not the intended recipient or agent thereof responsible for delivering this
message to the intended recipient, you are hereby notified that any dissemination,
distribution, or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify the sender immediately by
telephone and with a "reply" message.
Thank you for your cooperation.