22 Aug
1997
22 Aug
'97
2:19 a.m.
On Thu, 21 Aug 1997, Brett wrote:
On Thu, 21 Aug 1997, Tony Duell wrote:
I've run enough Mod I systems with no termination, with multiple,
the things aren't picky. The only reason to buy a 26-1160 was to
get the DOS and documentation, otherwise you could save $100 and
get a 26-1161 and if you were worried about it you could go next
door to the regular Radio Shack (my RSCC was adjacent) and buy a
terminator for $.99. Nobody that I knew ever bought two 26-1160
drives.
--
Ward Griffiths
"the timid die just like the daring; and if you don't take the plunge then
you'll just take the fall" Michael Longcor
It sounds like it might be working. It's been
a long time since I booted my
Model 1, but from memory, if the ROM basic detects a disk controller, it
attempts to boot from drive 0, and hangs if it can't do so.
Also! Remember
that the last drive in the chain must be the model 1160
as it is the one with the terminator! If you don't have an 1160 it may not
boot at ALL. If you have both, the first drive (I think) is always drive 0
and that is where the boot disk should go.