28 Dec
2009
28 Dec
'09
6:39 p.m.
And I seem to recall something GPIB from other
sources, like
Fairchild, AMD and NatSemi, as well.
The common HPIB/GPIB chips were the Texas Instruments TMS9914, the Intel
8291 and the NEC uPD7210. I've come across all of them. There was a
Motorola 68488 (what an obvious number!) which IIRC was a talker/listener
(no controller functions) designed to link to the 6800 bus. HP had their
own Medusa chip (1TL1 IIRC).. And Philips made (or second-sources) a
curious deveice in the 4000-series CMOS family that was essentially the
state machines and random logic for a talker/listener, and was designed
to add a GPIB interface to just about any digital instrument. I forget
the number of that one, I have a data sheet somewhere but have never seen
the actuall device.
Doubtless other manufactuerers made GPIB interface chips, not to mention
all the solutions using TTL logic chips (HP, Epson and several others
like that have passed my bench) and custom chips.
=20
>> I still think it would be a useful project for somebody to make a=3D2=
0
>> HP-drive-emulator. Mot using a PC, but
using a microntroller, HPIB=3D=
20
>> buffers, the minimal (if any) logic you
need to handle HPIB, and a CF=
=3D20
card. Make it 'open' and I'll build
several...
Or even a SATA, PATA, USB storage interface. Such a stand alone
emulator would be very useful. storage device you want. And surely it would be
better to have a workin=
g=20
desing for _any_ modern-ish storage device rather
than debate about whi=
ch=20
device to use.
=20
I was suggesting a bit more along the lines of "It would be nice if a
developer wouldn't focus solely on one type of storage but rather If this is a
9133XV with the HP controllers (6809 + 9114, etc), then I=20
have unofficial scheamtics. The floppy controller is actually quite=20
simple -- most of the logic is on the top board, the lower board contai=
ns=20
the master clock and disk data separator. Apart
from the EPROM (which i=
s=20
the sama as in a 9121 IIRC), there's nothing
remotely custom in there.
=20
It has the separate HP HD and FD controller boards. It appears to work
normally except that it is unable to read any floppies. Changing the from what you say, which implies the processor is
running
drive did not change anything about that. Beyond that,
no idea,
although it may be the data separator board. One Of These Days, I'll
dig it up, thaw it and see what else I can find.
IIRC there's one power line (a -ve one) which is used by the data
separator and nothing else. On soem even older designs this came from a
diode/capacitor voltage multiplier driven from the master clock. I think
by the time of the 9133V, it came from the main SMPSU. It's still worth
checking it.
Then see what the read clock and read data pins on the FDC (a 1793-a-like
IIRC) are doing. It's a pretty simple design, actually.
-tony