s?n 2020-04-26 klockan 19:33 -0400 skrev Chris Zach via cctalk:
Ok, so this evening I went back to the house to do a
quick evacuation
of
the most critical stuff and take some better pictures. This time I
brought a massive xeon flashlight which helps to get quicker
pictures
with less shake.
I also picked up a pile of Perq boards, and all the DC600 tapes and
floppies I could take out. The car was loaded with them, someone is
going to have to curate these. But since I know that the most
important
thing is the software and not the hardware I decided this is what to
get
as the top priority.
There appears to be a third Perq in there as well on the other side
of
the basement. No big drives (14 inch or 8 inch) but a lot of MFM and
SCSI disks. Couldn't grab those, too heavy.
I'm going to put together a list of people and see if I can figure
out a
way to get things out. The garage is blocked by an old car, and this
stuff will not go up the steps. Too narrow.
Never dull. Latest pictures are at
https://www.crystel.com/bob (I
moved
the old ones to a subfolder). I also took a better set of pictures
of
the VME boards, look like Sun boards.
C
picture 0269 is ECC memory and depending on version of card for:
Sun-3/260/280 and Sun-4/260/280 (501-1102)
Sun-4/260/280 (501-1254 32 MB , 501-1576 16 MB)
Sun-3/460/470/480 Sun-4/260/280 (501-1451, 501-1576)
https://www.sun3arc.org/FEH/Memory/3200.phtml
The 501 code is visible on the card or plate.