From: geneb at
deltasoft.com
Hi Gene
I'm not aware of the serial board with a parallel port. The only
one I know has 3 serial ports. They ususally only had 2 populated.
How are you determining that it isn't working? Is it possible that
there is an interrupt connected to it that is stealing your data?
Dwight
The board has three connectors along the top that go to DB25 connectors on
the back. The connectors are marked DCE, DTE and PARALLEL. The board has
"HEATH COPR" on the back, so I'm assuming it's a "standard"
card.
The tests are being done with a Hayes Smartmodem. I can talk to the modem
and watch it respond to commands but I get no data at the terminal. I'm
using MODEM as the terminal program.
tnx!
Hi
U should also post to SEBHC. Also, it may be missing a control
bit from the RS232. This can lock up the recieve. Check that all the
needed signals make it to the serial chips.
Dwight
_________________________________________________________________
i?m is proud to present Cause Effect, a series about real people making a difference.