Test software for PANDA display?

Hi, Bob, I'm finally nearing completion of my Panda display, at last, and I rememeber another Panda display owner mentioning that you sent them a test program to cycle the LEDs. Could you send that to me? I'm using Linux, so I'd prefer C or C++ source than a compiled binary, if that's OK (I've been twiddling LEDs and such from the parallel port under Linux for a while, so I don't anticipate any problems if I have to massage the code; of course you'd be welcome to any changes I made). I didn't get a chance to place a last parts order before the last plane, so I'm improvising like mad here. I found a couple of 4.7K SIPs (one just yesterday, thus the progress), but I may have to use discretes for the LED current limiters. To help me in my search, what values are reasonable for RP1-RP5 and RP8? I think I can find a wad of 220 Ohm resistors, but other low values might or might not be present here in the necessary abundance. Thanks, -ethan P.S. - I do have the JEDEC file for the GAL, a programmer, and several blanks, so that's no problem - just the current limiters. -- Ethan Dicks, A-333-S Current South Pole Weather at 7-Mar-2008 at 15:50 Z South Pole Station PSC 468 Box 400 Temp -45.2 F (-42.9 C) Windchill -82.5 F (-63.6 C) APO AP 96598 Wind 18.8 kts Grid 35 Barometer 680.0 mb (10628 ft) Ethan.Dicks at usap.gov http://penguincentral.com/penguincentral.html