1 Jan
2002
1 Jan
'02
12:06 p.m.
My first "real" job was heavily involved with SCO. We (SecureWare) wrote
the C2 subsystem for SCO.
To actually load this software, there should be a blue or pink card with a
serial number on it.
On December 29, Chad Fernandez wrote:
The other day I found a SCO Open Desktop 2.0.0 media
kit, on Qic24
tape. I don't have the correct drive...... I don't have any tape drive
experience, actually.
Does anybody have an unneeded Qic24 SCSI tape drive? I checked Ebay and
I didn't see anything that I thought was what I needed.
Pretty much any drive that reads 60MB DC600A tapes should be able to read
these tapes, but you will need to find a supported controller. I remember
using Wangtek drives & controllers.
This is going back into a very fuzzy memory...but does
anyone know
if an Archive 2150S drive (QIC-150) will read QIC-24 tapes?
Yup...a 2150S should read these tapes. I'm pretty sure the Adaptec 154x
controllers are supported by the install software.
Ken