17 May
2014
17 May
'14
9:38 a.m.
The tip with the look on the wiering of the backplane bring "light" into
the darknes.
Now the most Modules in right placees....
Only two module places left for confirmation.
Thanks to all so much!
Am 16.05.2014 22:33, schrieb Tony Duell:
In the
engeneering drawings "Module Utilization" are shown special
places for each module. In my drive the Modules on different places then
in the drawing.
Is the backplane a real bussystem or got i use the ports shown in drawings?
The T56 is most definitely not a bused backplane, the modules have to be
in the right slots.
I think exacltly which modules you need depeends on the controlleryou are
uisng it with. So you might need ot check that.
And DEC often drew the modual utilisation diagram looking a the _wiring_
side of the backpl;ane, not at the modules. It's a mirror image of what
you might expect.
-tony