7 May
2001
7 May
'01
3:06 p.m.
On May 7, 13:52, healyzh(a)aracnet.com wrote:
It's not a Computer, but I know for a fact that an
HP5MP Laserjet will
not
work with 60ns RAM, it wants 70ns RAM (company I
bought the RAM from sent
60ns by mistake). It just plain wouldn't recognize the RAM.
That may be because 72-pin SIMMs have 4 sense connections that tell the
host the speed and size. 60ns was rare when the 5 came out, and I expect
HP didn't include recognition of that code (possibly because it could also
mean something much slower -- some codes are re-used, though I can't
remember if the 60ns code is). If you changed one link on the SIMM I
expect it would work fine -- so long as the SIMM was FPM not EDO. Most of
the 60ns SIMMs I've seen are EDO, and that certainly won't work in an HP5M.
--
Pete Peter Turnbull
Network Manager
University of York