14 Dec
2017
14 Dec
'17
11:26 p.m.
On 2017-Dec-14, at 10:20 PM, Chuck Guzis via cctalk wrote:
On 12/14/2017 08:58 PM, Gregory McGill via cctalk
wrote:
The screw holes have a slightly different spacing between the two types, they have to be
'moved' (filed) out about a mm each;
and it looks like the existing opening will have to be enlarged vertically a bit.
If there's nothing interfering on the inside it does look like an easy candidate for
replacement with IEC.
I recently picked this up from shopgoodwill and
it has an older power
plug. It is NOT a standard plug as shown in the picture below that is too
tall and pins are smaller etc..
Anyone know the name of this 'standard' so I can find a cable? Or possibly
have one around I can get from you?
Greg
https://sgws3productimages.azureedge.net/sgwproductimages/images/8/11-25-20…
https://photos.app.goo.gl/HzXVUDqfCv5U7zBC2
From the looks of your unit, it might just be simpler to fit it with a
standard IEC receptacle. Note that the cutout is already rectangular,
so an IEC may just fit without any case modification. 