IBM 5120-troubles removing card cage

Hi! I feel a bit stupid, since I tore apart a lot of machines so I should be able to remove the card cage... but... I removed back covers and the two screws which hold the cage in place. I pulled gently the card, and I encountered a fair amount of resistance. Looking into the chassis (there's a hole under the cathodic tube) I noticed that the yellow flat cable (coming from the power section) blocked the cage on the left. Freed the cage I couldn't extract it completely, since the cage fan cable and a semitransparent flat cable (both disappearing internally, can't say where by now) are very short. I was barely able to remove the cage metal top cover. The semitransparent flat cable starts from the I/O Cable Driver card in the "A" position... Am I missing something? The manual has images of the card cage fully extracted still connected to the cables, but I wasn't able to do this. Thanks! -- Vincenzo (aka Supervinx) --==ooOoo==-- My computer collection: http://www.supervinx.com/OnlineMuseum --==ooOoo==-- You can reach me at: www.supervinx.com www.facebook.com/supervinx http://www.youtube.com/user/supervinx http://www.myspace.com/supervinx