23 Feb
2007
23 Feb
'07
7:06 p.m.
Hiya Chuck,
From: "Chuck Guzis" <cclist at sydex.com>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Sent: Saturday, February 24, 2007 1:10 PM
Subject: Re: Restoring an XT - transfer problem
Why not simply hook up a 3.5" drive (DSHD is
fine)? Get a DS2D
diskette by covering over the density aperture in a DSHD diskette and
format it up to 720K on your modern PeeCee using "format a: /n:9
/t:80". Write whatever you want to it and let the Commo read it.
The PC5 will not recognise a 3.5" disk, even using driver.sys to set the
parameters it always gives a "device
not ready" error.
Alternatively, hook up a 360K 5.25" to your
modern PeeCee and call it
a 1.44MB drive--format the blanks in your PC5 and your modern PC will
write them just fine.
No go, 3 different machines, 5 different drives - all the same error -
"Sector not found".
cheers,
Lance
// http://www.commodore128.org
Commodore 128 forums & more! //