10 May
2011
10 May
'11
3:49 p.m.
Hex height would only work in a PDP-8/a. -- Ian
________________________________________
From: cctalk-bounces at classiccmp.org [cctalk-bounces at classiccmp.org] On Behalf Of
Zane H. Healy [healyzh at aracnet.com]
Sent: Tuesday, May 10, 2011 11:23 AM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Unibus extender cards
One has to wonder what a production run of cards might cost, and how
many people would be interested in them. I don't have any. :-( I'd
be more interested in dual and quad height. Hex height could be used
in a PDP-8 as well, couldn't they?
Zane
At 10:58 AM -0700 5/10/11, Rich Alderson wrote:
Does anyone have hex-height Unibus extender cards they
would be willing
to part with, or loan?
We have created a printer interface card (based one the last rev of the
M8571 plus all relevant ECOs) for an LP20 in the front end of our Tops-10
system (a DECSYSTEM-2065). It turns out that the other cards in the LP20
are not entirely defect free, so we need to hook up a logic analyzer to
see where things are going wrong. We have no Unibus extenders, so we can't
do things like cool suspect delay pots.
We'd really prefer not to have to try building these. :-)
--
| Zane H. Healy | UNIX Systems Administrator |
| healyzh at aracnet.com | OpenVMS Enthusiast |
| | Photographer |
+----------------------------------+----------------------------+
| My flickr Photostream |
| http://www.flickr.com/photos/33848088 at N03/ |